Installing tile spacers between countertops is an important step in the process of tile installation. Tile installation specialists rely on spacers to take the weight off a countertop and create a flat surface for installation of tiles. Spacers are also used to protect the edges of a countertop from cracks and chips. Find out about the best tile leveling system available for any project.
Tile setters use spacers to hold tiles securely to the countertop surface. This allows the initial flooring material to run properly over the tiles without a lot of excess pressure applied to the countertop. A high quality tile setting machine can cut tiles perfectly even when they are curved, jagged or unevenly shaped. It is a specialized machine and only professional installers are allowed to use it.
Another important factor in successful tile installation is the spacing between the tiles. While regular jointering machines cannot maintain the proper spacing required for perfect and consistent tile set-up, spacers can be used to accomplish this task. On top of helping to prevent unwanted gaps between tiles, spacers also help to protect the edges of the countertop from chips, cracks and misalignment of tiles.
Even though most tile manufacturing companies use self leveling concrete that can be purchased from home improvement stores, it is still advised to have some spacers installed on the flat or average flat surface to evenly distribute the weight of the tile on top of the floor. Normally the spaces between the tiles are spaced evenly, but improper spacing can cause chips and cracks between the tiles which can affect the durability of the flooring material.
Most modern day tile setting machines include spacers. The smaller units come with no spacers and can be easily used with flat surfaces. The small units that require a cutting tool to cut slabs are typically equipped with the spacers.
It is important to remember that different tiles need different number of spacers to fit perfectly onto the countertop. Floors made of stone, stucco and granite require twice the number of spacers as a wood floor or a concrete floor. The self leveling tile spacers are often used for these kinds of floors since these types of flooring require a thicker cut of the tile to prevent gaps and cracks.
Floor tiles and laminate floors are two other types of flooring that require the use of tile spacers. Laminates have large raised areas of laminated material that require the use of a slightly offset cut to allow the tiles to evenly fit onto the surface. In order to achieve a proper flooring finish, these floors must be pre-finished by removing any of the laminate.
Tile spacers are also used on plywood floors, tiled walls and countertops. In order to ensure a professional finished look, professional installers can be hired. Most tile setting machines use a minimum number of tools to complete most tile installations, including the self leveling tile spacers.
Different types of flooring require different number of spacers. For example, laying tiles over low moisture areas like hardwood floors requires multiple spacers. This is because only one or two tiles can be removed at a time without causing the tiles to crack or chip.
Floor tiles and laminate floors also require different number of spacers to ensure uniform cutting. Most professional installers can easily cut all types of tiles into standard patterns and cut both marble and granite tiles. When installing marble or granite on a floor that already has carpeting, it is advisable to hire a professional installer.
Floor tiles and laminate floors are also one of the few types of flooring where installation of decorative tiles can be done by a novice. Even if the flooring is prepared from the start with decorative tiles, placing decorative tiles can make a flat surface unevenly cut. In order to avoid the problems of a flat surface being made unevenly, use spacers.
Using tile spacers is an important step in the process of tile installation. It prevents a tile cutter from cutting tool from causing damage and prevents uneven cutting on the tile surface.